Find this product here:
In vivo applications / Force and pressure meters
Biological Force Meter ST, DC powered
The input force range is wide enough to cover nearly every biological research application. Any force appearing in the body of an experimental animal can be measured with this Force Meter ST, only the appropriate sensor arrangement should be found. Our development engineers have huge experience in design of special force sensors and our technicians can manufacture them for you.
Plug-in DC Power Supply for Biological Force Meter ST shall be ordered separately.
Specifications / Technical Data
- Full scale value (it is jumper selectable):
- 2 N
- 20 N
- Resolution: 0.001 N or 0.01 N
- Linearity error maximum: +/- 0.003 N or 0.03 N
- Input offset force adjustment with a 10-turn helical potentiometer
- Correction range of the input offset force appearing at the force sensor: 1.5 times the current full scale
- Sampling speed of the front panel digital force display: 3 samples/sec
- Bandwidth at the analogue monitor output: it depends on the sensor, 0 to 200 Hz as maximum
- Scale factor of the analog monitor output: 1 V equals to 1 N or 10 N
- Analog output impedance: 300 Ohms
- Supply voltage: 15 to 24 V DC with any polarity
- DC Supply current: 500 mA
Descriptions
The input force range is wide enough to cover nearly every biological research application. Any force appearing in the body of an experimental animal can be measured with this Force Meter ST, only the appropriate sensor arrangement should be found. Our development engineers have huge experience in design of special force sensors and our technicians can manufacture them for you.
Plug-in DC Power Supply for Biological Force Meter ST shall be ordered separately.
Specifications / Technical Data
- Full scale value (it is jumper selectable):
- 2 N
- 20 N
- Resolution: 0.001 N or 0.01 N
- Linearity error maximum: +/- 0.003 N or 0.03 N
- Input offset force adjustment with a 10-turn helical potentiometer
- Correction range of the input offset force appearing at the force sensor: 1.5 times the current full scale
- Sampling speed of the front panel digital force display: 3 samples/sec
- Bandwidth at the analogue monitor output: it depends on the sensor, 0 to 200 Hz as maximum
- Scale factor of the analog monitor output: 1 V equals to 1 N or 10 N
- Analog output impedance: 300 Ohms
- Supply voltage: 15 to 24 V DC with any polarity
- DC Supply current: 500 mA
Images
Related products
Q&As
Comments
There are no comments related to this product!
Do you have comments? Please to post comments here!
